**-M531 - Arbitrary Waveform Generator
**-The M531 is a single channel USB arbitrary waveform generator compatible with USB 2.0 and USB 1.1 interface. The generator has two outputs: both generate same waveform, but with different peak-peak voltage. The low level output has 50ohm output impedance and maximal peak-peak voltage of 9V. There is no external power supply required to enable low level output (it is powered from USB bus).
- USB 2.0 and USB 1.1 compatible
- Fast low level output
- High level output (up to 50Vpp)
- 12 bit DA converter
- Sample rate up to 100 MS/s
- Powered from USB (external power is required for high level operation
- Small dimensions and weight
- Software for Windows 98SE, Windows ME, Windows 2000, Windows XP, Windows
Vista, Windows 7, Windows 8
The M531 AWG is a member of Etc Measuring
Lab 3 (EML3) family.
The high level output has 600ohm output impedance and maximal peak-peak voltage
of 50V. External power supply (part of the package) is required to enable this
The powerful software is a part of package. All commonly used features are
located in the main window and are easily accessible by mouse. The software is
designed to make operation as comfortable and intuitive as possible.
The waveform library contains several pre-defined waveform (Sine, Triangle, Saw,
Square). You can create new waveform (or modify existing one) by integrated
editors (freeform editor, math editor, standard waves editor). It is possible to
import data from the ASCII format (for example Matlab, Excel or any other
application, which supports this format).
Optional software package is available: M530 Development kit, which will allow
you to write your own application using the device.